Traxxas Summit Hardware & Accessories

TRAXXAS

Traxxas Wheel Hubs & Nuts Splined 17mm (green-anodized), 5353G

These are the optional 17mm Splined Wheel Hubs for the Revo series, Maxx series, Summit & Slayer.FEATURES: Aluminum construction, green anodized in color.INCLUDES: Four aluminum splined wheel hubs and nuts. Traxxas 17mm hubs and wheel nuts are made from...

TRAXXAS

Traxxas Flat Wrench (5mm, blue-anodized aluminum), 5477

This is a Flat, Open-End 5mm Wrench for the Revo and other specified Traxxas R/C vehicles.

TRAXXAS

Traxxas 3x10mm Countersunk Machine Hex Screws, 2551

These are the Traxxas Countersunk 3 x 10mm Screws.

TRAXXAS

Traxxas Official Team Traxxas Racing Decal Set (flag logo/ 6-color), 9950

These decals are designed to be used on any scale lexan R/C car and truck bodies. Pressure sensitive, peel and stick vinyl decals. Decals include: yellow, black, red, purple and yellow/orange Traxxas logos, Traxxas From Start To Finish (checkered flags)...

TRAXXAS

Traxxas Nuts 5mm Flanged Nylon Locking, 5147X

This is a package of 5mm Flanged Nylon Locking Nuts from Traxxas.

TRAXXAS

Traxxas Ball Bearings (5x8x2.5mm, blue rubber sealed), 5114

This is a 2-pack of Traxxas 5X8mm Ball Bearings. FEATURES: Metal bearing construction and blue rubber dirt shields.

TRAXXAS

Traxxas Button-Head Machine Screws, 3x12mm, 2578

This is a package of six 3x12mm Traxxas Button Head Screws.

TRAXXAS

Traxxas 3x15mm Countersunk Machine Hex Screws, 2553

These are the Traxxas Countersunk 3 x 15mm Screws.

TRAXXAS

Traxxas Pivot Balls w/Bushings (4), 4933

These are the Pivot Balls and Pivot Ball Cap Bushings for the Traxxas T-Maxx, E-Maxx 4WD, and other Traxxas Radio Control Monster Trucks. Two of these pivot balls fit into the axle carriers at each wheel. The pivot ball cap bushings fit between the pivot...

TRAXXAS

Traxxas Steel Suspension Pin Set (front or rear) -Revo/Summit/Slayer, 5321

This is the Steel Suspension Pin Set for the Traxxas Revo, Slayer, & Summit. They are also commonly known as Hinge Pins.FEATURES: Steel construction; Polished finish.INCLUDES: Two Long Suspension Pins; Four Short Suspension Pins.SPECS:Long Suspension Pin...

TRAXXAS

Traxxas Flat Wrench (8mm, blue-anodized aluminum), 5478

This is a Flat, Open-End 8mm Wrench for the Revo and other specified Traxxas R/C vehicles.

TRAXXAS

Traxxas E-clips, 1.5mm (24), 5150

This is a package of 24 1.5mm E-Clips from Traxxas.FEATURES: Zinc colored; Steel construction.

TRAXXAS

Traxxas Ball Bearings (6x12x4mm, blue rubber sealed), 5117

This is a 2-pack of Traxxas 6x12x4mm Ball Bearings. FEATURES: Metal bearing construction and blue rubber dirt shields.

TRAXXAS

Traxxas Teflon Washers (6x8x0.5), 3982

These are Teflon Washers for the T-Maxx 2.5 and other Traxxas R/C vehicles.

TRAXXAS

Traxxas Red Aluminum Pushrod Spacer, 5133

This is a package of 8 Aluminum Pushrod Spacers for the Traxxas Revo and other specified Traxxas R/C vehicles. These are installed on the Progessive suspension system. FEATURES: Red anodized aluminum construction. Use with 5318 or 5318X pushrod and 5358...

TRAXXAS

Traxxas Screws 3x6mm Cap-Head Machine Hex, 2554

These are replacement 3x6mm cap-head machine screws for several Traxxas R/C vehicles.

TRAXXAS

Traxxas Foam Body Washers (10), 4915

These are Foam Body Washers for the T-Maxx 4WD Radio Control Monster Truck and other specified Traxxas vehicles. These body washers adhere to the inside of the body over the body mount holes and cushions the body from vibration.

TRAXXAS

Traxxas Body Mounts and Posts - Revo/Slayer/Summit, 5314

This is the Front and Rear Body Mounts set with Body Posts for the Traxxas Revo, Slayer, and Summit.

TRAXXAS

Traxxas 3mm Nylon Locking Nuts (12), 2745

These are 3mm Nylon Locking Nuts for several Traxxas R/C vehicles.

TRAXXAS

Traxxas Ball Bearings 6x12x4mm, 4614

This is a replacement set of 6x12x4mm ball bearings for several specified Traxxas R/C vehicles.

TRAXXAS

Traxxas Body Clips (12) (standard size), 1834

These are Replacement Traxxas Body Clips. They can be used on Traxxas or most other brands of cars.

TRAXXAS

Traxxas LED Lights Front Harness Summit, 5689

This is the Front LED Lights Harness (4 clear lights) for use on the Traxxas Summit Truck RTR.

TRAXXAS

Traxxas Button-Head Machine Screws, 3x20mm, 2580

This is a package of six 3x20mm Traxxas Button Head Screws.

TRAXXAS

Traxxas Decal Sheet (racing sponsors), 2514

This is a Sponsor Decal Set for R/C Cars from Traxxas. These decals are designed to be used on any scale lexan R/C car and truck bodies. Pressure sensitive, peel and stick vinyl decals. These are the contingency/sponsorship decals that are used on race...

TRAXXAS

Traxxas Silicone Grease, 1647

This is Silicone grease that is used throughout most all of the Traxxas kits, it can also be used in most any R/C greasing application.

TRAXXAS

Traxxas Caphead Machine Screws 3x15mm, 5142

This is a Package of 3x15mm Cap Head Machine Screws with Split Washers. These are used on the Traxxas 2.5 engine exhaust header.

TRAXXAS

Traxxas Wheel Hubs & Nuts Splined 17mm (blue-anodized), 5353X

These are the optional 17mm Splined Wheel Hubs for the Revo series, Maxx series, Summit & Slayer.FEATURES: Aluminum construction, blue anodized in color.INCLUDES: Four aluminum splined wheel hubs and nuts.

TRAXXAS

Traxxas Hex Wrenches; 1.5mm, 2mm, 2.5mm, 3mm, 2.5 ball, 5476X

This is a set of Hex Wrenches for use on several Traxxas R/C vehicles.

TRAXXAS

Traxxas Button-Head Machine Screws, 3x6mm, 2575

This is a package of six 3x6mm Traxxas Button Head Screws.

TRAXXAS

Traxxas Ball Bearings (5x11x4mm, blue rubber sealed), 5116

This is a 2-pack of Traxxas 5X11X4mm Ball Bearings. FEATURES: Metal bearing construction and blue rubber dirt shields.

TRAXXAS

Traxxas Cap-Head Machine Screws 2.5x12mm (6), 3236

This is a set of 6 Cap-Head Machine Screws (2.5x12mm) for use on several Traxxas R/C vehicles.

TRAXXAS

Traxxas LED Lights Rear Harness Summit, 5688

This is the Rear LED Lights Harness (6 red lights) for use on the Traxxas Summit Truck RTR.

TRAXXAS

Traxxas Aluminum Nuts (5mm, locking, blue anodized), 4147X

These are 5mm Nylon Locknuts by Traxxas. FEATURES: Blue anodized aluminum construction with nylon inserts.

TRAXXAS

Traxxas Screws (2.6x8mm countersunk machine) (6), 5169

This is a package of six (6) 2.6 x 8mm flat head Countersunk Machine Screws from Traxxas.FEATURES: Silver metal construction; Flat head; Phillips drive; These are meant for Traxxas' EZ Start 2 motor, but will fit other applications also.

TRAXXAS

Traxxas Expander Box Seal Kit, 6552

This is the Expander Box Seal Kit for several specified Traxxas R/C vehicles. Includes o-ring, seals, and silicone grease.

TRAXXAS

Traxxas Button-Head Machine Screws, 3x8mm, 2576

This is a package of six 3x8mm Traxxas Button Head Screws.

TRAXXAS

Traxxas 3mm Hardened Grub Screw Set (12), 2743

This is the 3mm Hardened Grub Screw Set (12-pc) from Traxxas.

TRAXXAS

Traxxas 3x12mm Countersunk Machine Hex Screws, 2552

These are the Traxxas Countersunk 3 x 12mm Screws.

TRAXXAS

Traxxas Blue Wheel Nuts Splined 17mm, 5353

These are the blue anodized 17mm Splined Wheel Nuts for the several of the larger-scale Traxxas R/C vehicles, such as the Brushless E-Revo & Summit.FEATURES: Aluminum construction, blue anodized in color.INCLUDES: Four aluminum splined wheel nuts.

TRAXXAS

Traxxas Pivot Ball Caps w/Rubber Dust Boots, 5378X

This is the replacement Pivot Ball and Dust Cap Boot Set for the Revo, E-Revo, T-Maxx 3.3 and other specified Traxxas R/C vehicles.

TRAXXAS

Traxxas Glow Plug Wrench, 3980

This is the Optional Glow Plug wrench from Traxxas. Features aluminum construction. Will work on 7mm and 8mm glow plugs.

TRAXXAS

Traxxas Antenna Crimp Nut (aluminum red) w/tool, 5526R

This is the red anodized Traxxas Antenna Crimp Nut.

TRAXXAS

Traxxas Button-Head Machine Screws, 3x10mm, 2577

This is a package of six 3x10mm Traxxas Button Head Screws.

TRAXXAS

Traxxas Slipper Clutch Rebuild Kit, 5352X

This is the Traxxas Slipper Clutch Rebuild Kit for Revo, Summit and Maxx trucks. Includes steel disc, (3) friction pads, (2) springs, 2x9.8mm pin, 5x8mm MW, 5mm NL, 4mm NL.

TRAXXAS

Traxxas Antenna Crimp Nut (aluminum blue) w/tool, 5526

This is the blue anodized Traxxas Antenna Crimp Nut.

TRAXXAS

Traxxas Antenna Caps (2) and Spool, 1926

This is a set of Traxxas receiver tube caps and a spool that could be used for any receiver antenna tubes.

TRAXXAS

Traxxas Button-Head Machine Screws, 3x25mm, 2581

This is a package of six 3x25mm Traxxas Button Head Screws.

TRAXXAS

Traxxas Button-Head Machine Screws, 3x15mm, 2579

This is a package of six 3x15mm Traxxas Button Head Screws.

TRAXXAS

Traxxas Antenna Tube & Cap, 1726

This is a replacement antenna tube and cap. Antenna tubes are used to help secure and protect receiver antenna wires.

TRAXXAS

Traxxas Button-Head Machine Screws, 3x30mm, 2582

This is a package of six 3x30mm Traxxas Button Head Screws.

TRAXXAS

Traxxas Ball Bearings Blue Rubber Sealed 20x27x4mm, 5182

These are the 20x27x4mm Ball Bearings for use on the Traxxas Summit Truck RTR.

TRAXXAS

Traxxas Axle Pins 2.5x12mm, 4955

This is the Set of Axle Pins for the T-Maxx 4WD RTR Monster Truck and several Traxxas R/C vehicles.

TRAXXAS

Traxxas Servo Case/Gaskets for 2056 and 2075 Servos, 2074

This is the replacement Servo Case and Gasket Set for the Traxxas 2056 and 2075 servos.

TRAXXAS

Traxxas Wheel Hubs & Nuts Splined 17mm (red-anodized), 5353R

These are the optional 17mm Splined Wheel Hubs for the Revo series, Maxx series, Summit & Slayer.FEATURES: Aluminum construction, red anodized in color.INCLUDES: Four aluminum splined wheel hubs and nuts. Traxxas 17mm hubs and wheel nuts are made from...

TRAXXAS

Traxxas Hex Screws 3x10mm w/wrench, 3159

These are stock replacement screws for several Traxxas vehicles.

TRAXXAS

Traxxas LED Lights Center Harness Summit, 5687

This is the Center Harness and Wire Clip for the LED Lights used on the Traxxas Summit Truck RTR.

TRAXXAS

Traxxas LED Chrome Lightbar for Summit Roll Cage, 5684

4-LED Light Bar Brings Extra Candlepower To Traxxas Summit: Now you can blaze even brighter trails with the Traxxas Summit! The new Accessory Light Bar replaces the Summit’s chrome roof light bar with a high-intensity 4-LED lighting system. Fully...

TRAXXAS

Traxxas Y-Harness for Servo and LED Lights on Summit 2.4Ghz, 5696

This is the Traxxas Y-Harness for the Servo and LED Lights on the Summit 2.4Ghz.

TRAXXAS

Traxxas Head Screws 3x15mm Cap-Head Machine Hex, 2586

These are replacement 3x15mm cap-head machine screws for several Traxxas R/C vehicles.

TRAXXAS

Traxxas Multi-Tool (plastic), 5475

This is the Suspension Multi-Tool for Revo and other specified Traxxas R/C vehicles. It is used to adjust the the Shock Upper Cap, Shock Rod-end removal/install and to tighten/loosen the Pivot Ball Caps.