Traxxas Nitro 4-TEC 3.3 Driveline & Steering

TRAXXAS

Traxxas Servo Gears for 2055 and 2056 servos, 2053

This is a replacement Gear set for the Traxxas 2055 and 2056 servos.

TRAXXAS

Traxxas Ball Bearings, 5x8x2.5mm (2), 2728

These are the 5x8x2.5mm bearings for several Traxxas R/C vehicles.

TRAXXAS

Traxxas Rod Ends (short w/hollow balls, 6), 2742X

This is the 6-piece Short Rod Ends set for several specified Traxxas R/C vehicles. These rod ends attach to turnbuckles for front and rear. Requires appropriate turnbuckles.

TRAXXAS

Traxxas Differential Output Yokes (white, w/screws & pins), 4628

This is the Replacement Differential Output Yokes Set for several Traxxas R/C vehicles. FEATURES: White nylon differential output yokes. INCLUDES: 2 White nylon yokes; 4 3x3mm set screws (.5 pitch); 2 3x5mm countersunk screws (.5 pitch); 2 3x12mm yoke...

TRAXXAS

Traxxas Rear Drive Belt 4-TEC, 4865

This is the 6.0mm 52-groove HTD Rear Drive Belt for the Nitro 4-TEC from Traxxas.

TRAXXAS

Traxxas Wheel Hubs (hex w/pins, 2), 1654

These are the replacement rear wheel adapters for several Traxxas R/C vehicles.

TRAXXAS

Traxxas Middle Drive Belt 4-TEC, 4863

This is the 4.5mm 121-groove HTD Middle Drive Belt for the Nitro 4-TEC from Traxxas.

TRAXXAS

Traxxas Servo High-Torque Waterproof (blue case), 2056

This is the replacement High Torque Waterproof Servo for several Traxxas R/C vehicles. This part goes between the receiver and hooks to the steering or motor or engine to provide the power to either of these. INCLUDES: One High Torque Servo with J style...

TRAXXAS

Traxxas 20-Groove Middle Pulleys for Nitro 4-TEC, 4895

These are the replacement 20-Groove Middle Pulleys for the Traxxas Nitro 4-TEC.

TRAXXAS

Traxxas Servo Saver w/adapters, 3744

This is the replacement servo saver for several Traxxas vehicles. The servo saver is spring loaded and has adaptors for both Futaba and Airtronics servos.

TRAXXAS

Traxxas Wheel Hubs Blue Aluminum w/pins, 1654X

These are Optional Blue Anodized Aluminum Wheel Hex Hubs for Traxxas vehicles such as the Stampede, Rustler, 4-Tec, and other older Traxxas kits.

TRAXXAS

Traxxas Rod Ends Set (w/hollow balls & screws), 1942

This set of rod ends, balls, and screws is used on several Traxxas R/C vehicles.

TRAXXAS

Traxxas Differential Output Yokes (hardened steel w/U-joints), 4628X

These are hardened steel drive yokes for several Traxxas R/C vehicles, such as the Rustler and Stampede. Features hardened steel construction and is stronger than stock parts. These yokes also come with U-Joints pre-installed for ease of installation.

TRAXXAS

Traxxas Clutch Bell for Nitro 4-TEC, 4817

This is the replacement Clutch Bell for the Traxxas Nitro 4-TEC.

TRAXXAS

Traxxas Front Drive Belt 4-TEC, 4864

This is the 4.5mm 78-groove HTD Front Drive Belt for the Nitro 4-TEC from Traxxas.

TRAXXAS

Traxxas Stub Axle Pins (4), 2754

These are replacement stub axle pins for several Traxxas R/C vehicles. These pins slide through the axle and hold the wheel to the axle.

TRAXXAS

Traxxas Tie-Rods/Upper Camber Rods Rear 4-TEC, 4841

This is the replacement turnbuckle and draglink set for the Traxxas Electric and Nitro 4-TEC. Includes 24mm turnbuckles (4), draglink, 36mm (threaded rod).

TRAXXAS

Traxxas Servo High-Torque for T-Maxx and E-Maxx, 2055

This is the Replacment High Torque Servo for the Traxxas T-Maxx and E-Maxx or any other vehicle that you would like to mount this in. This part goes between the receiver and hooks to the steering or motor or engine to provide the power to either of these...

TRAXXAS

Traxxas Stub Axles Nitro 4-TEC, 4853

These are the Replacement Stub Axles for the Traxxas Nitro 4-Tec.

TRAXXAS

Traxxas Steering Blocks Axle Housings 4-Tec, 4336

This is a pair of the Steering Blocks for the Traxxas Electric and Nitro 4-TEC. Includes axle housings left and right with metal inserts 3x4.5x5.5mm.

TRAXXAS

Traxxas Grey Front Bearing Block for Nitro 4-TEC, 4827A

This is the replacement Grey Front Bearing Block (4827A) for the Traxxas Nitro 4-TEC. Supports front shaft. Includes belt tension adjustment shims (front/ middle)/ screws.

TRAXXAS

Traxxas Front Bearing Block for Nitro 4-TEC, 4827

This is the replacement Front Bearing Block (4827) for the Traxxas Nitro 4-TEC. Supports front shaft. Includes belt tension adjustment shims (front/ middle)/ screws.

TRAXXAS

Traxxas Front Pulley Shaft for Nitro 4-Tec, 4894

This is the Front Pulley Shaft for the Traxxas Nitro 4-Tec.

TRAXXAS

Traxxas Rear Pulley Shaft for Nitro 4-Tec, 4893

This is the Rear Pulley Shaft for the Traxxas Nitro 4-Tec.

TRAXXAS

Traxxas Telescopic Drive-Shafts 4-TEC, 4851

These are Replacement Drive-Shafts for the Traxxas Nitro 4-Tec. Includes external-splined (2) & internal-splined (2) and metal U-joints (4).

TRAXXAS

Traxxas Front/Rear Pulleys 15-Groove for Nitro 4-Tec, 4896

These are the replacement 15-Groove Front and Rear Pulleys for the Traxxas Nitro 4-TEC. Includes flanges (2)/ axle pins (2).

TRAXXAS

Traxxas Servo Mounts 4-TEC, 2715

This is the standard servo mount for the Traxxas Nitro 4-TEC.

TRAXXAS

Traxxas Aluminum Steering Blocks/Axle Housings, 4336X

This a pair of optional Front Axle Housing/Steering Blocks for the Traxxas Nitro and Electric 4-Tec. They are blue-anodized 6061-T6 aluminum left and right with metal inserts (3x4.5x5.5mm).

TRAXXAS

Traxxas Drive Shafts 4-Tec, 4351

These are the Stock replacement Drive Shafts for the Traxxas 4-Tec. Includes 4-external & 4-internal.

TRAXXAS

Traxxas Rear Drive Belt for Nitro 4-TEC, 4862

This is the replacement Rear Drive Belt (6mm width, 50-groove HTD) for the Traxxas Nitro 4-TEC.

TRAXXAS

Traxxas Front Drive Belt for Nitro 4-TEC, 4861

This is the replacement Front Drive Belt (4.5mm width, 76-groove HTD) for the Traxxas Nitro 4-TEC.