Traxxas 1/10 Rally VXL Driveline & Steering

TRAXXAS

Traxxas Heavy Duty Slipper Clutch Rebuild Kit, 5352R

This is the Heavy Duty Slipper Clutch Rebuild Kit from Traxxas. Fits Revo, Maxx and Slayer Pro 4x4 trucks. Includes steel disc/ aluminum friction pads (3)/ spring, Revo (1)/ spring, Maxx (1)/ 2x9.8mm pin/ 5x8mm MW/ 5.0mm NL (1)/ 4.0mm NL (1).

TRAXXAS

Traxxas Center Rear Drive Hub for Slash 4x4, 6888

This is the Center Rear Drive Hub for the Traxxas Slash 4x4.

TRAXXAS

Traxxas Steering Bellcranks and Servo Saver for Slash 4x4, 6845X

This is the Steering Bellcranks and Servo Saver for Set for the Traxxas Slash 4x4. Includes steering bellcranks/ servo saver/ servo saver spring/ servo spring retainer/servo horn. This part replaces the original Traxxas 6845.

TRAXXAS

Traxxas Steel Half Shaft External Splined Constant Velocity, 6750

This is the Traxxas Steel Half Shaft External Splined Constant Velocity for the XO-1 and Rally 10th Scale R/C Cars.

TRAXXAS

Traxxas Heavy-Duty Differential Output Yokes with Screw Pins, 6828X

These are the Heavy-Duty Differential Output Yokes with Screw Pins for the Traxxas Stampede 4X4 monster truck.

TRAXXAS

Traxxas Front Heavy-Duty Stub Axles w/yokes and pins, 6854X

These are the Front Heavy-Duty Stub Axles with yokes and pins for the Traxxas Stampede 4X4 monster truck.

TRAXXAS

Traxxas Ball Bearings, 5x8x2.5mm (2), 2728

These are the 5x8x2.5mm bearings for several Traxxas R/C vehicles.

TRAXXAS

Traxxas Front Stub Axle Steel-Splined Constant-Velocity, 6754

This is the Steel-Splined Constant-Velocity Front Stub Axle used on several Traxxas R/C vehicles. Includes 1 piece.

TRAXXAS

Traxxas Slipper Pressure Plate & Hub (aluminum alloy), 5556

These are the Slipper Press Plate and Hub for several Traxxas R/C vehicles. INCLUDES: One Slipper Press Plate; One Slipper Press Plate Hub.

TRAXXAS

Traxxas 49mm Camber Link Turnbuckles, 3643

These are the Traxxas 49mm Camber Link Turnbuckles for the Traxxas Stampede and Rustler (82mm center to center). Comes assembled with rod ends and hollow balls (1 left, 1 right).

TRAXXAS

Traxxas Turnbuckles, 58mm Camber Links, front or rear, 5539

These are the turnbuckles, 58mm camber links, for the front or rear of the Traxxas Jato. It is set of 2 and they come assembled with rod ends and hollow balls.

TRAXXAS

Traxxas Rear Driveshafts Steel-Spline Constant Velocity, 6852R

These are the Traxxas Steel-Spline Constant Velocity Rear Driveshafts for the Slash 4x4, Stampede 4x4, and Rally 1/10. These upgrade driveshafts are great for increasing power transfer efficiency and handling the large amount of torque produced by...

TRAXXAS

Traxxas Rear Heavy-Duty Stub Axles, 6853X

These are the Rear Heavy-Duty Stub Axles with pins for the Traxxas Stampede 4X4 monster truck.

TRAXXAS

Traxxas Ball Bearings (6x12x4mm, blue rubber sealed), 5117

This is a 2-pack of Traxxas 6x12x4mm Ball Bearings. FEATURES: Metal bearing construction and blue rubber dirt shields.

TRAXXAS

Traxxas Ball Bearings (12x18x4mm, blue rubber sealed), 5120

This is a 2-pack of Traxxas 12x18x4mm Ball Bearings. FEATURES: Metal bearing construction and blue rubber dirt shields.

TRAXXAS

Traxxas Rod Ends/Hollow Balls, 5525

These are the Rod Ends and Balls for the Jato and several specified Traxxas R/C vehicles. Includes 4 hollow balls for inner camber link.

TRAXXAS

Traxxas Input Shaft Slash 4x4, 6893

This is the Input Shaft for the Traxxas Slash 4x4.

TRAXXAS

Traxxas Motor Plate for Rally 10th, 7490

This is the Traxxas Motor Plate for the Rally 10th Scale R/C Car.

TRAXXAS

Traxxas 39mm Camber Link Turnbuckles, 3644

These are the 39mm camber link turnbuckles for the Traxxas Stampede and Rustler (69mm center to center) (front) (assembled with rod ends and hollow balls) (1 left, 1 right).

TRAXXAS

Traxxas Screws 3x6mm Cap-Head Machine Hex, 2554

These are replacement 3x6mm cap-head machine screws for several Traxxas R/C vehicles.

TRAXXAS

Traxxas Gear Cover and Wire Retainer for Rally 10th, 7477

This is the Traxxas Gear Cover and Wire Retainer for the Rally 10th Scale R/C Car.

TRAXXAS

Traxxas Aluminum Bearing Adapter for Slipper Shaft, 6893X

This is the Aluminum Bearing Adapter for Slipper Shaft of the Traxxas Slash and Stampede 4X4 monster truck. Includes bearing adapter and 10x15x4mm ball bearing.

TRAXXAS

Traxxas Complete Center Differential Kit for Slash 4X4, 6814

This is the Traxxas Complete Center Differential Kit for Slash 4X4.

TRAXXAS

Traxxas Rod Ends (long w/hollow balls, 6), 2742

This is the 6-piece long Rod Ends set for several specified Traxxas R/C vehicles. These rod ends attach to turnbuckles for front and rear. Requires appropriate turnbuckles.

TRAXXAS

Traxxas Slipper Pressure Plate/Hub (alloy), 5351

This is a Replacement Slipper Pressure Plate and Slipper Hub for several Traxxas vehicles, including the Revo series, Maxx series, Summit & Slayer. These are part of the slipper assembly.FEATURES: Aluminum constructionINCLUDES: One slipper pressure...

TRAXXAS

Traxxas Rear Heavy-Duty Driveshaft Assembly (left or right), 6852X

This is the Rear Heavy-Duty Driveshaft Assembly, left or right, with screw pin that comes fully assembled for the Slash 4X4 or Stampede 4X4 monster trucks. This item replaces the TRA6852.

TRAXXAS

Traxxas Blue Aluminum Center Driveshaft Slash 4x4, 6855

This is a Blue Anodized 6061-TS Aluminum Center Driveshaft for the Traxxas Slash 4x4.

TRAXXAS

Traxxas Front Heavy-Duty Driveshaft Assembly (left or right), 6851X

This is the Front Heavy-Duty Driveshaft Assembly, left or right, with screw pin that comes fully assembled for the Slash 4X4 or Stampede 4X4 monster trucks. Replaces TRA6851.

TRAXXAS

Traxxas Silicone Grease, 1647

This is Silicone grease that is used throughout most all of the Traxxas kits, it can also be used in most any R/C greasing application.

TRAXXAS

Traxxas Button-Head Machine Screws, 3x6mm, 2575

This is a package of six 3x6mm Traxxas Button Head Screws.

TRAXXAS

Traxxas Ball Bearings (5x11x4mm, blue rubber sealed), 5116

This is a 2-pack of Traxxas 5X11X4mm Ball Bearings. FEATURES: Metal bearing construction and blue rubber dirt shields.

TRAXXAS

Traxxas Center Differential Gear Set Slash 4x4, 6883

Traxxas Center Differential Gear Set for the Slash 4x4. Includes output gears (2)/ spider gears (2)/ spider gear shaft.

TRAXXAS

Traxxas Grease, White Lithium, 5148

This is a Tube of White Lithium Grease from Traxxas. This product can be used to lubricate parts, such as nylon gears.

TRAXXAS

Traxxas Heavy-Duty Half Shafts with Metal U-Joints, 6850X

This is the Heavy-Duty Half Shafts with Metal U-Joints set for the Traxxas Stampede 4X4 montster truck.

TRAXXAS

Traxxas Motor Mount for 1/10 Rally VXL Car, 7460

This is the Traxxas Motor Mount for the Rally 10th Scale R/C Car. Comes assembled with 3x6 flat-head machine screw.

TRAXXAS

Traxxas Slipper Clutch Rebuild Kit, 5552X

This is the Slipper Clutch Rebuild Kit for the Traxxas Slash 4x4 and other 1/10 scale Traxxas Trucks. Includes steel disc/ friction pads (3)/ spring (2)/ pin/ 4.0mm NL/ 5.0mm NL. Replaces Traxxas 5552.

TRAXXAS

Traxxas Complete Slipper Clutch - Stampede 4x4, 6878

This is the Complete Slipper Clutch for the Traxxas Stampede 4x4.

TRAXXAS

Traxxas Front Bulkhead for 1/10 Rally VXL, 7430

This is the Traxxas Front Bulkhead for the Rally 10th Scale R/C Car.

TRAXXAS

Traxxas Metal 3x6mm Washers (12), 2746

These are 3x6mm Washers from Traxxas (12).

TRAXXAS

Traxxas Ball Bearings (10x15x4mm, blue rubber sealed), 5119

This is a 2-pack of Traxxas 10x15x4mm Ball Bearings. FEATURES: Metal bearing construction and blue rubber dirt shields.

TRAXXAS

Traxxas Slipper Clutch Rebuild Kit, 5352X

This is the Traxxas Slipper Clutch Rebuild Kit for Revo, Summit and Maxx trucks. Includes steel disc, (3) friction pads, (2) springs, 2x9.8mm pin, 5x8mm MW, 5mm NL, 4mm NL.

TRAXXAS

Traxxas Front Steel Drive Hub Slash 4x4, 6888X

This is the Front Hardened Steel Drive Hub for the Traxxas Slash 4x4.

TRAXXAS

Traxxas Backplate Screws (3x8mm hex cap) w/wrench, 1552

These are replacement motor screws and washers for any 05 size motor.

TRAXXAS

Traxxas Screws, 3x6mm flat-head machine (hex) (6), 3932

These are the 3x6mm Flathead Machine Screws used on several Traxxas vehicles.FEATURES: Constructed of steel, black in colorINCLUDES: Six 3x6mm Flathead Machine Screws

TRAXXAS

Traxxas Steering Linkage for 1/10 Rally VXL Car, 7438

This is the Traxxas Steering Linkage for the Rally 10th Scale R/C Car.