Savox SC-1252MG Low Profile High Speed Metal Gear Digital Servo

This is the Savox SC-1252MG Low Profile High Speed Metal Gear Digital Servo.

• Super high 4096 resolution and metal gears.
• Super light-weight.
• Coreless Motor provides high speed, incredible efficiency, and lower power consumption than comparable servos
• The aluminum case design not only looks good but also helps operation to remain cool and smooth.
• Our servos are totally green – from materials to production, these servos are environmentally friendly.
• Ideal as a steering servo for 1/10 surface applications and in gliders and airplanes that have thin wing profiles.

• Dimensions(mm): 40.8X20.2X25.4
• Weight(g): 44.5
• Speed(@4.8V sec/60): .09
• Torque(@4.8V oz-in): 89
• Speed(@6.0V sec/60): .07
• Torque(@6.0V oz-in): 97.2
• Gear: Metal
• Bearing: 2BB
• Case: Aluminum
• Running current (at no load): 150 mA @ 4.8V
• Running current (at no load): 180 mA @ 6.0V
• Stall current (at locked): 2000 mA @ 4.8V
• Stall current (at locked): 3000 mA @ 6.0V
• Idle current (at stopped): 5 mA @ 4.8V
• Idle current (at stopped): 5 mA @ 6.0V
• Limit angle: 200°±10°
• Connector wire gauge: #22 AWG
• Connector wire length: 300 ±5 mm
• Horn gear spline: 25T
• Control system: Pulse width modification
• Amplifier type: Digital Controller
• Operating Travel: 100° (when 1000→2000 μsec)
• Neutral position: 1500 μsec
• Dead band width: 5 μsec
• Rotating direction: Clockwise (when 1500→2000 μsec)
• Pulse width range: 700→2300 μsec
• Maximum travel: Approx 160° (when 700→2300 μsec)