RPM Prop Guards for the LaTrax Alias - Black, 72042

The LaTrax Alias is a fun entry-level quadcopter. However, a simple propeller blade strike can possibly take out one of its tiny motors. RPM Prop Guards for the Alias help protect you from that dilemma. RPM Prop Guards are super lightweight and install in a matter of minutes, adding a tremendous amount of protection to both the motors and propellers of the Alias.

Each Prop guard is molded in RPM's trademark blend of engineering grade nylons for unmatched strength and durability. While making these guards extremely tough, they also made them very light to minimize the effects of added weight on the air frame, weighing in at a mere 4 grams per guard!

RPM Prop Guards for the LaTrax Alias are sold in pairs (two pairs will be needed for one Alias) and are molded in either black or blue. RPM Prop Guards will pay for themselves the first time you have one of those “oops” moments! Don’t let a mistake ruin your day of fun. Bolt a set of RPM Prop Guards on and let your confidence soar!

Tech Notes: RPM Prop Guards are designed as “bumpers” to help deflect light to medium impacts. They are not designed to save the Alias from full speed or gravity fed crashes. Sold in pairs (two pairs are required for one Alias). Four Prop Guards (2 – front & 2 – rear) must be installed at the same time. Failure to install Prop Guards in all four corners may cause adverse flying characteristics. A 0.05″ hex key wrench is required (not included) for installation. RPM aerial products are backed by our limited lifetime warranty against materials and workmanship issues but do not carry the same breakage warranty as our surface products. For more information on the RPM warranty policy as it applies to aerial products, please visit the RPM warranty FAQ page here:

http://www.rpmrcproducts.com/faq/rpm-warranty-policy-aerial