Traxxas Rustler VXL Transmission & Gearing

TRAXXAS

Traxxas Complete Differential for 1/10 2WD Slash, Rustler, Stampede, Bandit, 2380

This is the Newly Released Complete Differential for the Traxxas 1/10 2WD Slash, Bandit, Stampede and Rustler.

TRAXXAS

Traxxas Rear Driveshafts Steel-Spline Constant Velocity for 2WD Rustler/Stampede, 1951R

These are the Traxxas Steel-Spline Constant Velocity Rear Driveshafts for the 2WD Rustler and Stampede. Traxxas Steel Constant Velocity Shafts offer the ultimate in torque handling and efficient power transfer. The outer U-joints are lubricated and...

TRAXXAS

Traxxas Pinion Gear 48P 31-Tooth, 2431

This is an optional 31-tooth pinion gear for the Traxxas Rustler VXL.

TRAXXAS

Traxxas Differential Output Yokes (black, w/screws & pins), 4628R

This is the Replacement Differential Output Yokes Set for several Traxxas R/C vehicles. FEATURES: Black nylon differential output yokes. INCLUDES: 2 Black nylon yokes; 4 3x3mm set screws (.5 pitch); 2 3x5mm countersunk screws (.5 pitch); 2 3x12mm yoke...

TRAXXAS

Traxxas Slipper Pressure Plate & Hub (aluminum alloy), 5556

These are the Slipper Press Plate and Hub for several Traxxas R/C vehicles. INCLUDES: One Slipper Press Plate; One Slipper Press Plate Hub.

TRAXXAS

Traxxas Steel Top Drive Gear (22-tooth), 3195

This is the 22 tooth, hardened steel top drive gear for several Traxxas R/C vehicles.

TRAXXAS

Traxxas Spur Gear 48P 86-Tooth, 4686

This is an optional spur gear for certain Traxxas VXL units with the torque control slipper clutch.

TRAXXAS

Traxxas Pinion Gear 48P 25-Tooth, 4725

This is an optional 25-tooth pinion gear for Traxxas VXL and other Traxxas vehicles.

TRAXXAS

Traxxas Pinion Gear 48P 28-Tooth, 4728

This is an optional 28-tooth pinion gear for the Traxxas 4-TEC and other Traxxas vehicles.

TRAXXAS

Traxxas Pinion Gear 48P 23-Tooth, 2423

This is an optional 23-tooth pinion gear for Traxxas VXL and other Traxxas vehicles.

TRAXXAS

Traxxas Half Shaft Pro-Pack (6), 1953

This is a set of the Traxxas telescoping drive shafts (equivalent of dogbones or swing shafts). These are for use on Traxxas trucks and come with the shafts only. Dimensions: 2.5" long when fully compressed.

TRAXXAS

Traxxas Pinion Gear 48P 16-Tooth, 2416

This is an optional 16-tooth pinion gear for Traxxas VXL and other Traxxas vehicles.

TRAXXAS

Traxxas Planetary Gear Differential w/Steel Ring Gear (complete), 2388X

This is the Complete Planetary Gear Differential With Steel Ring Gear for the Traxxas Slash, Bandit, Stampede and Rustler. FEATURES: Metal gear shafts; Metal and plastic main differential. INCLUDES: Main differential with steel ring gear; Planetary gears...

TRAXXAS

Traxxas Pinion Gear 48P 18-Tooth, 1918

This is an optional 18-tooth pinion gear for Traxxas VXL and other Traxxas vehicles.

TRAXXAS

Traxxas Spur Gear 48P 83-Tooth, 4683

This is an optional spur gear for certain Traxxas VXL units with the torque control slipper clutch.

TRAXXAS

Traxxas Pinion Gear 48P 26-Tooth, 2426

This is an optional 26-tooth pinion gear for Traxxas VXL and other Traxxas vehicles.

TRAXXAS

Traxxas Gearbox halves (l&r) (black) w/ idler gear shaft, 3691

These are the Traxxas Black Gearbox Halves (left & right) with idler gear shaft

TRAXXAS

Traxxas Pinion Gear 48P 19-Tooth, 2419

This is an optional 19-tooth pinion gear for Traxxas VXL and other Traxxas vehicles.

TRAXXAS

Traxxas Spur Gear 48P 90-Tooth, 4690

This is an optional spur gear for certain Traxxas VXL units with the torque control slipper clutch.

TRAXXAS

Traxxas Planetary Gears & Shafts Set, 2382

These are the replacement planetary gears and shafts for several Traxxas R/C vehicles. FEATURES: All-metal gears and shafts. INCLUDES: 4- planetary gears; 4- planteary gear shafts; 2- sun gears; 1- sun gear alignment shaft.

TRAXXAS

Traxxas Main Diff w/Steel Ring Gear, 2381X

This is the Main Diff with Steel Ring Gear from Traxxas for the Slash and Bandit, Stampede and Rustler series.

TRAXXAS

Traxxas Slipper Clutch Shaft with Roll Pin, 3793

This is the Traxxas Slipper Clutch Shaft with Roll Pin. This part will fit both the standard and XL version of the Rustler or Stampede.

TRAXXAS

Traxxas Half Shafts (long truck w/metal U-joints, 4), 1951

This is a set of telescoping drive shafts for several Traxxas R/C vehicles.

TRAXXAS

Traxxas Pro Series Magnum 272R Transmission, 9495

Upgrade Your Bandit, Rustler, Stampede, or Slash with the Toughest Transmission Available   This is the Traxxas Pro Series Magnum 272R Transmission. Developed specifically for the hard-hitting Drag Slash, the Pro Series Magnum 272R upgrades...

TRAXXAS

Traxxas Dust Cover & Rubber Plug, 3792

This is the Dust Cover & Rubber Plug for the Traxxas Rustler & Stampede. Made from black molded nylon.

TRAXXAS

Traxxas Spur Gear 48P 76-Tooth, 4676

This is an optional spur gear for the Traxxas Rustler VXL and Bandit VXL.

TRAXXAS

Traxxas Differential Output Yokes (hardened steel w/U-joints), 4628X

These are hardened steel drive yokes for several Traxxas R/C vehicles, such as the Rustler and Stampede. Features hardened steel construction and is stronger than stock parts. These yokes also come with U-Joints pre-installed for ease of installation.

TRAXXAS

Traxxas Idler gear, steel (30-tooth), 3696

This is the steel idler gear (30-tooth) for many Traxxas electric vehicles.

TRAXXAS

Traxxas Gearbox halves (l&r) (gray) w/ idler gear shaft, 3691A

These are the Traxxas gray Gearbox Halves (left & right) with idler gear shaft

TRAXXAS

Traxxas Complete Transmission for 1/10 2WD Slash, Rustler, Stampede, Bandit, 3695

This is the Newly Released Complete Transmission for the Traxxas 1/10 2WD Slash, Bandit, Stampede and Rustler.

TRAXXAS

Traxxas Fixed Gear Adapter, 3790

This is the Fixed Gear Adapter for several specified Traxxas R/C vehicles. Made from black molded nylon. Take the guesswork out of setting gear mesh and ensure rock solid hold with Traxxas fixed gear adapters. Compatible with all Traxxas 2WD models...