Traxxas Nitro Sport Transmission & Gearing

TRAXXAS

Traxxas One-Way Starter Bearing, 4011

This is the stock replacement One-Way Bearing for the Traxxas engines. This bearing is located on the starter shaft.SPECS: Inner bearing diameter: 6mm (0.24")NOTES: This bearing is unique to this engine, and cannot be substituted byanother bearing.

TRAXXAS

Traxxas Clutch Shoes & Spring (N. Rustler/N.Sport/N.Stampede), 4146

This is the Stock Replacement Clutch Shoes and Spring set for the Nitro Stampede, Nitro Rustler & Nitro Sport. These shoes are located underneath the clutch bell.

TRAXXAS

Traxxas Clutch Bell (18-tooth), 4118

This is the Traxxas 18 Tooth Steel Replacement Clutch Bell. This clutch bell attaches to the adapter unit on the crankshaft, makes contact with the clutch shoes and meshes with the main gear.FEATURES: Fits all Traxxas 1/10th scale nitro vehicles...

TRAXXAS

Traxxas Half Shaft Pro-Pack (6), 1953

This is a set of the Traxxas telescoping drive shafts (equivalent of dogbones or swing shafts). These are for use on Traxxas trucks and come with the shafts only. Dimensions: 2.5" long when fully compressed.

TRAXXAS

Traxxas Differential Output Yokes (white, w/screws & pins), 4628

This is the Replacement Differential Output Yokes Set for several Traxxas R/C vehicles. FEATURES: White nylon differential output yokes. INCLUDES: 2 White nylon yokes; 4 3x3mm set screws (.5 pitch); 2 3x5mm countersunk screws (.5 pitch); 2 3x12mm yoke...

TRAXXAS

Traxxas 20-tooth Idler Gear and Shaft, 4196

This is the Replacement Idler Gear and Shaft for several Traxxas Nitro R/C vehicles.

TRAXXAS

Traxxas Slipper Friction Pegs (12), 4685

These are the Slipper Friction Pegs (12) for several Traxxas vehicles that have a slipper clutch.

TRAXXAS

Traxxas 16-tooth Top Drive Gear Nitro Rustler and Sport, 4493

This is the Slipper Shaft with installed 16-tooth Top Drive Gear for the Traxxas Nitro Rustler and Sport.

TRAXXAS

Traxxas Flywheel, 4142

This is the aluminum 2-pin flywheel used on several Traxxas R/C trucks.

TRAXXAS

Traxxas Slipper Clutch Set Complete, 4615

This is the Traxxas Slipper Clutch Set for select Traxxas nitro vehicles.

TRAXXAS

Traxxas Differential Gear 45-tooth with Side Cover Plate, 4181

This is a Diff Gear and Side Coverplate with Screws by Traxxas.

TRAXXAS

Traxxas Spur Gear, 72-Tooth, 32-Pitch w/bushing, 4472

This is a Spur Gear, 72-Tooth, 32-Pitch with bushing for several Traxxas vehicles including the Rustler and T-Maxx.

TRAXXAS

Traxxas Planetary Gears & Shafts Set, 2382

These are the replacement planetary gears and shafts for several Traxxas R/C vehicles. FEATURES: All-metal gears and shafts. INCLUDES: 4- planetary gears; 4- planteary gear shafts; 2- sun gears; 1- sun gear alignment shaft.

TRAXXAS

Traxxas Notched Slipper Pressure Rings, 4622

These are the replacement slipper and differential rings for the Traxxas kits that have slipper clutches and ball diffs. They are metal rings with a notch in them and are installed on either side the differential gear or the spur gear.

TRAXXAS

Traxxas Half Shafts (long truck w/metal U-joints, 4), 1951

This is a set of telescoping drive shafts for several Traxxas R/C vehicles.

TRAXXAS

Traxxas Slipper Tension Spring Set, 1994

This is the replacement slipper tension spring set for several specified Traxxas R/C nitro vehicles.

TRAXXAS

Traxxas Clutch Bell (20-tooth), 4120

This is the Traxxas 20 Tooth Steel Replacement Clutch Bell. This clutch bell attaches to the adapter unit on the crankshaft, makes contact with the clutch shoes and meshes with the main gear.FEATURES: Fits all Traxxas 1/10th scale nitro vehicles...

TRAXXAS

Traxxas Differential Output Yokes (hardened steel w/U-joints), 4628X

These are hardened steel drive yokes for several Traxxas R/C vehicles, such as the Rustler and Stampede. Features hardened steel construction and is stronger than stock parts. These yokes also come with U-Joints pre-installed for ease of installation.

TRAXXAS

Traxxas Clutch Bell (22-tooth), 4122

This is the Traxxas 22 Tooth Steel Replacement Clutch Bell. This clutch bell attaches to the adapter unit on the crankshaft, makes contact with the clutch shoes and meshes with the main gear.FEATURES: Fits all Traxxas 1/10th scale nitro vehicles...

TRAXXAS

Traxxas Slipper Pressure Plate, 4625

Traxxas Slipper Pressure Plate

TRAXXAS

Traxxas Recoil Pull Starter (.12 & .15), 4070

This is the Replacement Recoil Starter Assembly for the Traxxas TRX-12, TRX-15 and Pro-15 Engine.INCLUDES: One Recoil Starter Unit w/String and Handle InstalledCOMMENTS: This doesn't have the backplate or any of the attachment hardware. For the One-Way...

TRAXXAS

Traxxas Ball Differential Pro Style with Bearings, 4420

This is a Pro Ball Differential for the Traxxas Nitro Stampede, Nitro Rustler and Nitro Sport.

TRAXXAS

Traxxas Rear Bulkhead (Nitro Stampede), 4192

This is the replacement Rear Bulkhead for the Nitro Stampede and other specified Traxxas Nitro R/C vehicles.

TRAXXAS

Traxxas Clutch Bell (16-tooth), 4116

This is the Traxxas 16 Tooth Steel Replacement Clutch Bell. This clutch bell attaches to the adapter unit on the crankshaft, makes contact with the clutch shoes and meshes with the main gear.FEATURES: Fits all Traxxas 1/10th scale nitro vehicles...

TRAXXAS

Traxxas Clutch Adapter Nut, 4144

This is a replacement clutch adapter nut for the Stampede and other specified Traxxas nitro trucks. This screws onto the crankshaft of the engine (not for use with IPS crankshafts).

TRAXXAS

Traxxas Gearbox Halves Nitro Rustler and Sport, 4491

This set contains the stock replacement gearbox halves for the Traxxas Nitro Rustler and Sport.