Traxxas E-Maxx Transmission & Gearing

TRAXXAS

Traxxas Center Driveshafts Steel Constant-Velocity - E-Maxx, 5151R

This is a pair of optional Steel Constant-Velocity Center Driveshafts for the Traxxas E-Maxx.

TRAXXAS

Traxxas Heavy Duty 12-T Pinion Gear (32-pitch), 3942X

This is a 12-tooth, 32-pitch heavy duty hardened steel pinion gear for several Traxxas vehicles. This is the gear which is attached directly to the motor.

TRAXXAS

Traxxas Gearbox Halves Front/Rear Maxx, 3991X

These are the replacement Gearbox Halves for the Traxxas Summit and Maxx Trucks. Includes shift detent ball/ spring/ 4mm GS/ shift shaft seal, glued/ 2.5x8mm CS (2).

TRAXXAS

Traxxas Spur gear (65-tooth; 0.8 metric pitch), 3960

This is the 65-tooth, 0.8 metric pitch spur gear for several Traxxas electric and nitro vehicles.

TRAXXAS

Traxxas Heavy Duty Pinion Gear (22-T; 32-p), 3952X

This is a 22-tooth, 32-pitch heavy duty pinion gear (machined steel) for several Traxxas vehicles. This is the gear which is attached directly to the motor.

TRAXXAS

Traxxas Idler Gear, 13T (1st speed gear), 3976

This is the replacement 13 Tooth Idler Gear (first speed gear) for the Traxxas two-speed conversion (TRA3998) for the E-Maxx. FEATURES: Steel construction, gun metal in color. Replaces a worn or damaged idler gear.

TRAXXAS

Traxxas Gear Set Close Ratio (1st speed gear 21T, 18T input gear), 3973

This is the Close Ratio Gear Set for the Traxxas E-Maxx and other electric Traxxas trucks. Features white plastic construction and includes (1) 21T 1st speed gear & (1) 18T input gear.

TRAXXAS

Traxxas Shift Fork and Shaft, 3989X

This is the Shift Fork and Shaft included with the optional Two Speed Conversion Kit used on the Traxxas E-Maxx.

TRAXXAS

Traxxas Output Gear 33T, 3984X

This is the Output Gear 33T for the Traxxas Summit and Maxx series 4WD RTR.

TRAXXAS

Traxxas Heavy Duty 16-T Pinion Gear (32-pitch), 3946X

This is a 16-tooth, 32-pitch heavy duty hardened steel pinion gear for several Traxxas vehicles. This is the gear which is attached directly to the motor.

TRAXXAS

Traxxas Differential Gear Set T/E-Maxx, 4982

This is the Stock Replacement Diff Gear Set for the Traxxas T/E Maxx. These gears can also be referred to as bevel gears.

TRAXXAS

Traxxas Idler Gear 20T/Idler Gear Shaft, 3996X

This is the replacement 20-Tooth Idler Gear and Shaft for the Traxxas Summit and Maxx series 4WD RTR.

TRAXXAS

Traxxas Heavy Duty 17-T Pinion Gear (32-pitch), 3947X

This is a 17-tooth, 32-pitch heavy duty hardened steel pinion gear for several Traxxas vehicles. This is the gear which is attached directly to the motor.

TRAXXAS

Traxxas Heavy-Duty Differential Output Yokes, 4928X

These are the optional Differential Output Yokes for the T-Maxx and E-Maxx and the newer 2.5 T-Maxx from Traxxas.

TRAXXAS

Traxxas Heavy Duty Pinion Gear (21-T; 32-p), 3951X

This is a 21-tooth, 32-pitch heavy duty pinion gear (machined steel) for several Traxxas vehicles. This is the gear which is attached directly to the motor.

TRAXXAS

Traxxas Output Shaft Transmission, 3969

This is the Transmission Output Shaft for several Traxxas vechicles, including the E-Maxx.

TRAXXAS

Traxxas U-Joints Driveshaft, 5452

These are the Drive Shaft Joints for the Revo and other specified Traxxas R/C vehicles.

TRAXXAS

Traxxas Input Shaft/Drive Gear Assembly (18-tooth steel top gear), 3992

This is the replacement Input Shaft/Drive Gear Assembly for the E-Maxx and other Traxxas R/C vehicles.FEATURES: Steel shaft, black in color. Steel drive gear assembly, silver in color.INCLUDES: One Input Shaft with 18 Tooth Top Gear.

TRAXXAS

Traxxas Yokes Differential and Transmission, 5458X

These are the Differential and Transmission Drive Yokes for the T-Maxx 3.3 and other specified Traxxas R/C vehicles.

TRAXXAS

Traxxas Heavy Duty 20-T Pinion Gear (32-pitch), 3950X

This is a 20-tooth, 32-pitch heavy duty hardened steel pinion gear for several Traxxas vehicles. This is the gear which is attached directly to the motor.

TRAXXAS

Traxxas Spool Differential, 5381X

This is the Traxxas Spool Differential. It eliminates the stock differential. Use off-road only. Requires #5379X ring gear.

TRAXXAS

Traxxas Slipper Pressure Plate/Hub (alloy), 5351

This is a Replacement Slipper Pressure Plate and Slipper Hub for several Traxxas vehicles, including the Revo series, Maxx series, Summit & Slayer. These are part of the slipper assembly.FEATURES: Aluminum constructionINCLUDES: One slipper pressure...

TRAXXAS

Traxxas Driveshaft Assembly Maxx/Revo, 5451X

This is the replacement Driveshaft Assembly for the Traxxas Nitro 3.3 and Electric Revo and Maxx vehicles. Includes one driveshaft fully assembled for front/rear, left or right.

TRAXXAS

Traxxas Heavy Duty 19-T Pinion Gear (32-pitch), 3949X

This is a 19-tooth, 32-pitch heavy duty hardened steel pinion gear for several Traxxas vehicles. This is the gear which is attached directly to the motor.

TRAXXAS

Traxxas Spur gear (62-tooth; 0.8 metric pitch), 3959

This is the 62-tooth, 0.8 metric pitch spur gear for several Traxxas electric and nitro vehicles.

TRAXXAS

Traxxas Carrier Differential (heavy duty), 3978

This is the Carrier Differential for the Traxxas Revo and E-Maxx.FEATURES: Replaces worn diff carriers gaskets and spacersINCLUDES: Diff Carrier and Gaskets (TRA5381)Steel Spider Gear Braces (not used with Revo)Instruction sheetREQUIRES: Disassembly of...

TRAXXAS

Traxxas Gear Set Wide Ratio (1st speed gear 26T, 13T input gear), 3974

This is the Wide Ratio Gear Set for the Traxxas E-Maxx and other electric Traxxas trucks. Features white plastic construction and includes (1) 26T 1st speed gear & (1) 13T input gear.

TRAXXAS

Traxxas Heavy Duty 14-T Pinion Gear (32-pitch), 3944X

This is a 14-tooth, 32-pitch heavy duty hardened steel pinion gear for several Traxxas vehicles. This is the gear which is attached directly to the motor.

TRAXXAS

Traxxas Spur gear (68-tooth; 0.8 metric pitch), 3961

This is the 68-tooth, 0.8 metric pitch spur gear for several Traxxas electric and nitro vehicles.

TRAXXAS

Traxxas Output Gears 33T, 3985X

This is the Output Gear Set for the Traxxas Summit and Maxx series 4WD RTR. Includes two 33-tooth output gears, drive dog carrier and output shaft spacer.

TRAXXAS

Traxxas Heavy Duty 13-T Pinion Gear (32-pitch), 3943X

This is a 13-tooth, 32-pitch heavy duty hardened steel pinion gear for several Traxxas vehicles. This is the gear which is attached directly to the motor.

TRAXXAS

Traxxas Heavy Duty 15-T Pinion Gear (32-pitch), 3945X

This is a 15-tooth, 32-pitch heavy duty hardened steel pinion gear for several Traxxas vehicles. This is the gear which is attached directly to the motor.

TRAXXAS

Traxxas Differential Gear Set, 5382X

This is the Differential Gear Set for the Revo, E-Maxx and other specified Traxxas R/C vehicles.

TRAXXAS

Traxxas Differential Ring and Pinion Gears, 5379X

This is the Differential Ring Gear and Pinion for use with the Traxxas Revo 3.3, Slash and other specified Traxxas R/C vehicles.

TRAXXAS

Traxxas Slipper Clutch Rebuild Kit, 5352X

This is the Traxxas Slipper Clutch Rebuild Kit for Revo, Summit and Maxx trucks. Includes steel disc, (3) friction pads, (2) springs, 2x9.8mm pin, 5x8mm MW, 5mm NL, 4mm NL.

TRAXXAS

Traxxas Servo Sub-Micro Waterproof, 2065

This is the Sub Micro Servo included in the Two Speed Conversion Kit used on the E-Maxx and other large-scale Traxxas electric vehicles. FEATURES: Sub micro size; Waterproof construction; Actuates the Internal Shift Fork (TRAC3906) with the push of a...

TRAXXAS

Traxxas Linkage Shift, 3988X

This is the Shift Linkage included with the optional two Speed Conversion Kit used on the Traxxas E-Maxx. Includes ball cup, servo horn with built-in spring, linkage wire, and hardware.

TRAXXAS

Traxxas Driveshafts Steel Constant-Velocity, Revo/Maxx, 5451R

This is a set of Upgrade Steel Driveshafts for the Traxxas Nitro 3.3 and Electric Revo and Maxx vehicles. Comes assembled with inner & outer dust boots. For models with sealed pivot ball suspension & 3.8'' wheels.

TRAXXAS

Traxxas Heavy Duty 18-T Pinion Gear (32-pitch), 3948X

This is a 18-tooth, 32-pitch heavy duty hardened steel pinion gear for several Traxxas vehicles. This is the gear which is attached directly to the motor.

TRAXXAS

Traxxas Driveshaft Steel Constant-Velocity 112mm Rear, 5188

This is the 112mm Steel Constant-Velocity Traxxas Driveshaft for the Traxxas E-Maxx. This is the shaft only with drive cup pin. Fits rear center shaft on 3905 and 3908 E-Maxx.

TRAXXAS

Traxxas Driveshaft Steel Constant-Velocity 55mm Front, 5187

This is the 55mm Steel Constant-Velocity Traxxas Driveshaft for the Traxxas E-Maxx. This is the shaft only with drive cup pin. Fits front center shaft on 3905 and 3908 E-Maxx.

TRAXXAS

Traxxas Center Half Shafts, 5650

This is the Center Half Shaft Set for the Traxxas E-Revo, E-Maxx and Summit.

TRAXXAS

Traxxas Two Speed Conversion Kit for E-Maxx, 3998

This is the optional Two Speed Conversion Kit for the Traxxas E-Maxx.FEATURES: Provides more torque for climbing and driving through mud, grass and snow. Close ratio set (18/21) provides almost seamless shifting into second for quicker acceleration; Wide...

TRAXXAS

Traxxas Center Differential Kit E-Revo, E-Maxx, 5614

This is the Center Differential Kit for the Traxxas E-Revo and E-Maxx. Comes assembled with 100K oil. Use only with single speed transmission.

TRAXXAS

Traxxas Half Shaft Set left or right, 5450

This is a replacement Half Shaft Set for the Revo and other specified Traxxas R/C vehicles. This package contains a portion of the telescoping drive shafts.

TRAXXAS

Traxxas Front Machined Differential Ring and Pinion Gears, 5379R

This is the Front Machined Differential Ring Gear and Pinion for use with the Traxxas Revo 3.3, Slash, and other specified Traxxas R/C vehicles. Spiral cut machined.

TRAXXAS

Traxxas Differential Housings for T & E-Maxx, 3979

These are the Left and Right Differential Housings for the Traxxas E-Maxx & T-Maxx.FEATURES: Constructed of plastic. Replaces damaged or broken diff housings.INCLUDES: Left and Right Differential Housings and Pinion Collar.