Home > MIP RC Hop-ups >

New!  MIP X-Duty Rear CVD Kit for Traxxas Bandit/Fiesta ST Rally, 18390

MIP X-Duty Rear CVD Kit for Traxxas Bandit/Fiesta ST Rally


 
Alternative Views:


Retail Price $90.00
Our Price $72.00
Earn 72 Rewards Points
Manufacturer #: 18390

Availability: IN STOCK
Product Code: MIP18390

What You Need to Know
 
COMPATIBILITY:

--Traxxas Bandit
  • For ultimate efficiency use with ball bearing Traxxas Rear Hubs. (TRA3752, TRA5116)
  • Strong 12mm Keyed Hex Standard (Must use 12mm wheels not compatible with pin)
  • When hubs are in the lowest position, clearance on the arm may be necessary for the X-Duty™ Bell to rotate freely. Best to use a sanding drum to clearance the plastic arm. (check out photo with wrench pointing to area)
  • Front Traxxas 12mm Hex Conversion : 1 x TRA1654
  • Upgrade Hubs and Bearings recommended : TRA3752 , TRA5116
--Traxxas Fiesta ST Rally
  • Direct Fit, No Modification Needed.
  • Front CVD™ Kit: #19390

Advantages:
  • Strong splined X-Duty™ steel construction.
  • Fully rebuildable so any damaged or worn part can be replaced. (scroll down on main part # and all rebuild components are there)
  • Ultimate upgrade for those that are drag racing!
  • No more ripped and twisted drivetrain.
Pro Tips:
  • Use MIP Grease and Loctite upon assembly.
  • Be sure to keep joints lubed to enjoy long part life
Features:
  • Heat Treated steel components to help increase strength and part life.
  • Black Oxide coated to protect the components from premature rust.
  • 100% Designed / Manufactured / Packaged in the USA!!!
Includes:
  • Complete Rear X-Duty™ Drivetrain

FEATURES:

INCLUDES:
  • 1 - MIP Inst. Sheet, 18390 Traxxas Bandit
  • 1 - MIP Thread Gel Safety Sheet
  • 1 - MIP Support Parts Insert Sheet
  • 1 - MIP Lube & Thread Gel Cup
  • 2 - MIP Confetti Sticker
  • 2 - CVD Axles/Traxxas Slash Duty Rear
  • 2 - MIP X-Duty™ Female Bone, 40mm
  • 2 - MIP X-Duty, Drive Hub, 13mm w/ 5mm Bore
  • 2 - MIP X-Duty Male Bone, 42mm
  • 2 - shss/ M3 x 4mm Flat Point
  • 2 - Hex Adapter Traxxas X-Duty CVD Kit
  • 4 - MIP M4 Pin Screw Slash Diff
  • 4 - MIP Bearing Spacer, Rear, Traxxas Slash/ Slash 4x4
  • 2 - spacer/ HPI Blitz ft. bearing spacer
  • 5 - MIP 1/4" CVD Coupling
  • 5 - Ř.092 x .625 Cross Pin w/ flat
  • 5 - shss/ 8-32 x 1/8 flat point
  • 2 - nut/ m4x.7 steel nyloc

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

MIP RC Hop-ups
MIP RC Hop-ups > MIP for Traxxas Bandit