Home > Hot Racing Parts >

Hot Racing Steel Spur Gear 52T 1 Mod for Traxxas X-Maxx/XO-1
Hot Racing Steel Spur Gear 52T 1 Mod for Traxxas X-Maxx/XO-1


 
Retail Price $38.99
Our Price $28.88
Earn 30 Rewards Points
Manufacturer #: SXMX52M01

Availability: IN STOCK
Product Code: HRASXMX52M01

What You Need to Know
 
This is the Hot Racing 52 tooth hardened steel Mod1 (1.0 metric pitch) spur gear for the Traxxas X-Maxx and XO-1 vehicles.

SPECIAL NOTE: DO NOT use the pin system for setting the X-Maxx gear mesh. Instead, manually set the gear mesh without the pins. Refer to the Traxxas manual for instructions (ref. pg.22 - Adjusting Gear Mesh): "With the pins removed, use the four 4x16mm button-head cap screws on the bottom to set gear mesh. Loosen the four 4x16mm button-head cap screws. Cut a narrow strip of notebook paper and run it into the gear mesh. Slide the motor and pinion gear into the spur gear. Tighten the four 4x16mm buttonhead cap screws, and then remove the strip of paper. You should be able to run a fresh strip of paper through the gears without binding them."
FEATURES:
  • CNC machined hardened steel construction
  • Black oxide finished
  • Laser etched tooth count marking

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Hot Racing Parts
Hot Racing Parts > Hot Racing Traxxas X-Maxx Parts
Hot Racing Parts > Hot Racing Traxxas XO-1 Supercar Parts