RPM Mega Bearing Blaster, 70420

The New RPM Mega Bearing Blaster picks up where the original RPM Bearing Blaster leaves off. The "Mega" Bearing Blaster can now handle bearing sizes up to 1.25” (32mm) in diameter, which means that larger 1/5th scale R/C owners, roller-bladers, skateboarders and skaters (using the immensely popular 608 bearing) now have a new and bettery option for cleaning their bearings.

The RPM Mega Bearing Blaster is one of the smallest tools in our lineup, but the results achieved are anything but small. Unlike the competition's bearing cleaning devices and solutions, the RPM Mega Bearing Blaster uses pressure to blast dirt and debris from dirty bearings, giving immediate results. And using this handy tool couldn’t be easier. Just remove the top, place the bearing (with shields removed) on the center cone of the base, and then replace the top. Then, just fit the spray tube of your favorite cleaner into the top of the Mega Bearing Blaster, hold it down, and start blasting! Your filthy bearings will be clean in no time!

The Mega Bearing Blaster isolates the bearing, making it a safer way to blast debris away by preventing your hands and/or face from getting hit with back-splash of cleaners and lubricants. Even better, though, the Mega Blaster can also be used to lubricate your bearing as well. Just switch from cleaner to lightweight lubricant, give it a blast, and that's it!

Tech notes: The RPM Mega Bearing Blaster works on bearings with a minimum inside diameter of 3/16” (5mm) and a maximum outside diameter of 1.25” (32mm).