Traxxas E-Revo Brushless Hardware & Accessories

TRAXXAS

Traxxas Body Clips, heavy duty (12), 3934

These are the Body Clips for several Traxxas R/C vehicles.FEATURES: Steel construction, Natural polished color.INCLUDES: Twelve Body Clips

TRAXXAS

Traxxas Wheel Hubs & Nuts Splined 17mm (green-anodized), 5353G

These are the optional 17mm Splined Wheel Hubs for the Revo series, Maxx series, Summit & Slayer.FEATURES: Aluminum construction, green anodized in color.INCLUDES: Four aluminum splined wheel hubs and nuts. Traxxas 17mm hubs and wheel nuts are made from...

TRAXXAS

Traxxas Blue Aluminum Wheels/Tires for Wheelie Bar, 5186A

These are the Rubber Tires and Blue Anodized Aluminum Wheels for the Wheelie Bar on several Traxxas R/C vehicles.

TRAXXAS

Traxxas Flat Wrench (5mm, blue-anodized aluminum), 5477

This is a Flat, Open-End 5mm Wrench for the Revo and other specified Traxxas R/C vehicles.

TRAXXAS

Traxxas Nuts (5mm, nylon locking) (8), 4147

These are 5mm Nylon Locknuts by Traxxas. FEATURES: Chromed steel construction. Nylon inserts.

TRAXXAS

Traxxas 3x10mm Countersunk Machine Hex Screws, 2551

These are the Traxxas Countersunk 3 x 10mm Screws.

TRAXXAS

Traxxas Hollow Balls/Shims, 5355

These are the replacement Hollow Balls and Shims for the Nitro Revo Monster Truck and several Traxxas R/C vehicles. Includes: hollow ball, tall centered (2)/ tall offset hollow ball (2)/ bump steer adjustment shims; 3.5mm (2), 1.17mm (2)

TRAXXAS

Traxxas Screw Pin 4x15mm (6), 5145

This is the replacement Screw Pin Set for the Nitro Revo Monster Truck and several Traxxas R/C vehicles.

TRAXXAS

Traxxas Ball Bearings (5x10x4mm, blue rubber sealed), 5115

This is a 2-pack of Traxxas 5x10x4mm Ball Bearings. FEATURES: Metal bearing construction and blue rubber dirt shields.

TRAXXAS

Traxxas Official Team Traxxas Racing Decal Set (flag logo/ 6-color), 9950

These decals are designed to be used on any scale lexan R/C car and truck bodies. Pressure sensitive, peel and stick vinyl decals. Decals include: yellow, black, red, purple and yellow/orange Traxxas logos, Traxxas From Start To Finish (checkered flags)...

TRAXXAS

Traxxas Nuts 5mm Flanged Nylon Locking, 5147X

This is a package of 5mm Flanged Nylon Locking Nuts from Traxxas.

TRAXXAS

Traxxas Ball Bearings (5x8x2.5mm, blue rubber sealed), 5114

This is a 2-pack of Traxxas 5X8mm Ball Bearings. FEATURES: Metal bearing construction and blue rubber dirt shields.

TRAXXAS

Traxxas Bearing Needle Roller 6x10x8mm, 5121

This is the Needle Roller Bearing Set for the Forward/Reverse Output Gears on the Traxxas Revo series and Slayer.

TRAXXAS

Traxxas Small Rod Ends (steering linkage), 5349

This is the Small Rod End Set for the Traxxas Revo. These are used on the steering linkage.FEATURES: Plastic construction; Black in color; Metal Pivot Balls.INCLUDES: Six Rod Ends; Six Pivot Balls.SPECS: Length: 18mm (.71"); Width at ball joint: 9.5mm (...

TRAXXAS

Traxxas Button-Head Machine Screws, 3x12mm, 2578

This is a package of six 3x12mm Traxxas Button Head Screws.

TRAXXAS

Traxxas 3x15mm Countersunk Machine Hex Screws, 2553

These are the Traxxas Countersunk 3 x 15mm Screws.

TRAXXAS

Traxxas Pivot Balls w/Bushings (4), 4933

These are the Pivot Balls and Pivot Ball Cap Bushings for the Traxxas T-Maxx, E-Maxx 4WD, and other Traxxas Radio Control Monster Trucks. Two of these pivot balls fit into the axle carriers at each wheel. The pivot ball cap bushings fit between the pivot...

TRAXXAS

Traxxas Wheelie Bar Arm, 4974

This is the Wheelie Bar Arm for several specified Traxxas R/C vehicles.

TRAXXAS

Traxxas Wheelie Bar Mount for Revo Series, 5473

This is the Wheelie Bar Mount for all Traxxas Revo Trucks.

TRAXXAS

Traxxas Steel Suspension Pin Set (front or rear) -Revo/Summit/Slayer, 5321

This is the Steel Suspension Pin Set for the Traxxas Revo, Slayer, & Summit. They are also commonly known as Hinge Pins.FEATURES: Steel construction; Polished finish.INCLUDES: Two Long Suspension Pins; Four Short Suspension Pins.SPECS:Long Suspension Pin...

TRAXXAS

Traxxas Flat Wrench (8mm, blue-anodized aluminum), 5478

This is a Flat, Open-End 8mm Wrench for the Revo and other specified Traxxas R/C vehicles.

TRAXXAS

Traxxas E-clips, 1.5mm (24), 5150

This is a package of 24 1.5mm E-Clips from Traxxas.FEATURES: Zinc colored; Steel construction.

TRAXXAS

Traxxas Ball Bearings (6x12x4mm, blue rubber sealed), 5117

This is a 2-pack of Traxxas 6x12x4mm Ball Bearings. FEATURES: Metal bearing construction and blue rubber dirt shields.

TRAXXAS

Traxxas Teflon Washers (6x8x0.5), 3982

These are Teflon Washers for the T-Maxx 2.5 and other Traxxas R/C vehicles.

TRAXXAS

Traxxas Rubber Tires for Wheelie Bar Wheels, 5185

These are the Rubber Tires for the Wheelie Bar (TRA4975) for all Traxxas Maxx series vehicles.

TRAXXAS

Traxxas Ball Bearings (12x18x4mm, blue rubber sealed), 5120

This is a 2-pack of Traxxas 12x18x4mm Ball Bearings. FEATURES: Metal bearing construction and blue rubber dirt shields.

TRAXXAS

Traxxas Body Clip, angled, 90-degrees (10), 3935

These are the replacement Angled Body Clips for several Traxxas R/C vehicles.FEATURES: Metal Construction, Silver in Color, Bent for Easy Removal.INCLUDES: Ten Bent Silver Metal Body Clips

TRAXXAS

Traxxas 3x21mm Button-Head Machine Screws, 4978

This is a 6-pack of 3X21mm Button-Head Screws for the Revo and several Traxxas R/C vehicles. These bolts are used to secure the brake calipers.

TRAXXAS

Traxxas Ball Bearings Blue Rubber Sealed 6x13x5mm, 5180

This is a pair of Blue Rubber Sealed 6x13x5mm Ball Bearings for the Traxxas Revo series and Slayer.

TRAXXAS

Traxxas Screws, 4x10mm Button-Head Machine (hex) (6), 3936

This is a 4x14mm Button Head Screw Set for several Traxxas vehicles, including the Revo. On the Revo, it is used to mount the Electronics Box.FEATURES: Steel construction; Black in color; Low-profile, button-head design; Hex drive (allen type)INCLUDES:...

TRAXXAS

Traxxas Red Aluminum Pushrod Spacer, 5133

This is a package of 8 Aluminum Pushrod Spacers for the Traxxas Revo and other specified Traxxas R/C vehicles. These are installed on the Progessive suspension system. FEATURES: Red anodized aluminum construction. Use with 5318 or 5318X pushrod and 5358...

TRAXXAS

Traxxas Large Rod Ends, Revo/Summit/Slayer (for rear toe link only) (4), 5348

TraxxaThis is a set of Rod Ends for the Traxxas Revo, Slayer, or Summit. They are to be used on the Rear Toe-Link Rods only. Ring on the rod end shaft denotes for Rear Toe Links only. If Pivot Balls are needed, use TRA5355.FEATURES: Plastic construction;...

TRAXXAS

Traxxas Screws 3x6mm Cap-Head Machine Hex, 2554

These are replacement 3x6mm cap-head machine screws for several Traxxas R/C vehicles.

TRAXXAS

Traxxas Foam Body Washers (10), 4915

These are Foam Body Washers for the T-Maxx 4WD Radio Control Monster Truck and other specified Traxxas vehicles. These body washers adhere to the inside of the body over the body mount holes and cushions the body from vibration.

TRAXXAS

Traxxas Body Mounts and Posts - Revo/Slayer/Summit, 5314

This is the Front and Rear Body Mounts set with Body Posts for the Traxxas Revo, Slayer, and Summit.

TRAXXAS

Traxxas 3mm Nylon Locking Nuts (12), 2745

These are 3mm Nylon Locking Nuts for several Traxxas R/C vehicles.

TRAXXAS

Traxxas Wheelie Bar Assembled for Revo Series, 5472

This is the assembled Wheelie Bar for all Traxxas Revo Trucks.

TRAXXAS

Traxxas Ball Bearings 6x12x4mm, 4614

This is a replacement set of 6x12x4mm ball bearings for several specified Traxxas R/C vehicles.

TRAXXAS

Traxxas Body Clips (12) (standard size), 1834

These are Replacement Traxxas Body Clips. They can be used on Traxxas or most other brands of cars.

TRAXXAS

Traxxas Cap-Head Machine Screws (2.5x8mm) (6), 3965

This is a 6 pack of Traxxas 2.5X8mm Cap Head Screws.

TRAXXAS

Traxxas Shoulder Screws w/threadlock (3x10mm (6), 3966

This is the 3x10mm Shoulder Screw Set with threadlock for several Traxxas vehicles.

TRAXXAS

Traxxas Cap-Head Machine Screws (3x28mm hex) (6), 3963

This is a 6-pack of Traxxas 3X28mm Cap Head Screws.

TRAXXAS

Traxxas Button-Head Machine Screws, 3x20mm, 2580

This is a package of six 3x20mm Traxxas Button Head Screws.

TRAXXAS

Traxxas Decal Sheet (racing sponsors), 2514

This is a Sponsor Decal Set for R/C Cars from Traxxas. These decals are designed to be used on any scale lexan R/C car and truck bodies. Pressure sensitive, peel and stick vinyl decals. These are the contingency/sponsorship decals that are used on race...

TRAXXAS

Traxxas Silicone Grease, 1647

This is Silicone grease that is used throughout most all of the Traxxas kits, it can also be used in most any R/C greasing application.

TRAXXAS

Traxxas Caphead Machine Screws 3x15mm, 5142

This is a Package of 3x15mm Cap Head Machine Screws with Split Washers. These are used on the Traxxas 2.5 engine exhaust header.

TRAXXAS

Traxxas Ball Bearings 5x10x4mm, 4609

This is a replacement set of 5x10x4mm ball bearings for several specified Traxxas R/C vehicles.

TRAXXAS

Traxxas Wheel Hubs & Nuts Splined 17mm (blue-anodized), 5353X

These are the optional 17mm Splined Wheel Hubs for the Revo series, Maxx series, Summit & Slayer.FEATURES: Aluminum construction, blue anodized in color.INCLUDES: Four aluminum splined wheel hubs and nuts.

TRAXXAS

Traxxas Hex Wrenches; 1.5mm, 2mm, 2.5mm, 3mm, 2.5 ball, 5476X

This is a set of Hex Wrenches for use on several Traxxas R/C vehicles.

TRAXXAS

Traxxas Button-Head Machine Screws, 3x6mm, 2575

This is a package of six 3x6mm Traxxas Button Head Screws.

TRAXXAS

Traxxas Ball Bearings (5x11x4mm, blue rubber sealed), 5116

This is a 2-pack of Traxxas 5X11X4mm Ball Bearings. FEATURES: Metal bearing construction and blue rubber dirt shields.

TRAXXAS

Traxxas Cap-Head Machine Screws 2.5x12mm (6), 3236

This is a set of 6 Cap-Head Machine Screws (2.5x12mm) for use on several Traxxas R/C vehicles.

TRAXXAS

Traxxas Aluminum Nuts (5mm, locking, blue anodized), 4147X

These are 5mm Nylon Locknuts by Traxxas. FEATURES: Blue anodized aluminum construction with nylon inserts.

TRAXXAS

Traxxas Screws (2.6x8mm countersunk machine) (6), 5169

This is a package of six (6) 2.6 x 8mm flat head Countersunk Machine Screws from Traxxas.FEATURES: Silver metal construction; Flat head; Phillips drive; These are meant for Traxxas' EZ Start 2 motor, but will fit other applications also.

TRAXXAS

Traxxas Expander Box Seal Kit, 6552

This is the Expander Box Seal Kit for several specified Traxxas R/C vehicles. Includes o-ring, seals, and silicone grease.

TRAXXAS

Traxxas Button-Head Machine Screws, 3x8mm, 2576

This is a package of six 3x8mm Traxxas Button Head Screws.

TRAXXAS

Traxxas 3mm Hardened Grub Screw Set (12), 2743

This is the 3mm Hardened Grub Screw Set (12-pc) from Traxxas.

TRAXXAS

Traxxas 3x12mm Countersunk Machine Hex Screws, 2552

These are the Traxxas Countersunk 3 x 12mm Screws.

TRAXXAS

Traxxas Blue Wheel Nuts Splined 17mm, 5353

These are the blue anodized 17mm Splined Wheel Nuts for the several of the larger-scale Traxxas R/C vehicles, such as the Brushless E-Revo & Summit.FEATURES: Aluminum construction, blue anodized in color.INCLUDES: Four aluminum splined wheel nuts.

TRAXXAS

Traxxas Center Wing Mount Revo, 5413

This is the replacement Center Wing Mount for the optional Traxxas Revo series wing mount set (TRA5411).