 |
Traxxas EZ-Peak™ Plus LiPo-Compatible Balance Charger
The Traxxas EZ-Peak Plus (#2933) is a fully-programmable AC/DC charger designed for fast and easy charging of LiPo, LiFe, LiIon, NiMH, NiCd, and even lead-acid battery packs. Sophisticated peak-detection technology with Fast Charge, Balance Charge, and Storage modes assure peak performance from high-performance lithium batteries. A 2amp discharger is built in. Optional dual charging accessory allows you to simultaneously charge either two 2S or two 3S battery packs, perfect for E-Revo® and E-Maxx®.
Fully Programmable Charging
EZ-Peak Plus makes sophisticated charging simple with its easy-to-use interface—just scroll, input, and enter to customize charge amperage (6 amps max!), discharge amperage, battery capacity, cell count, battery type, and more.
Backlit LCD Display
EZ-Peak Plus features a brightly backlit LCD display that's easy to read whether you're racing at an indoor track or charging batteries in the park. The high-contrast screen displays all the critical parameters of your battery's status as you charge, discharge, and cycle packs. Charging amperage, charge time, voltage, capacity—even individual cell voltages for LiPo, LiIon, and LiFe packs are displayed as you charge.
Integrated Cooling Fan
To keep this hard-working charger cool, the EZ-Peak Plus features an internal cooling fan that switches on automatically. Even at its maximum output of 6 amps, EZ-Peak Plus is ready for all-day R/C at the track, pond, backyard or your favorite driving spot.
Standard XH Balance Board
EZ-Peak Plus' included balance board allows the cells in LiPo, LiIon, and LiFe packs to be charged and discharged individually, assuring maximum capacity, power, performance, and cycle life. Ports are included for 2S-6S battery packs, and the JST/XH plugs make EZ-Peak Plus compatible with most LiPo brands.
Plug-in Charge Leads
EZ-Peak Plus is ready to charge any pack with a Traxxas High Current Connector, Molex plug, or standard receiver-pack plug. No adapters are required, just plug the required charge leads directly into the EZ-Peak Plus. All three charge leads are included.
TECHNICAL SPECS:
- AC Input: 100–240 Volts
- DC Input: 11–18 Volts
- Charge Current Range: 0.1–6.0A (80W Max.)
- Discharge Current Range: 0.1–2.0A (10W Max.)
- Current Drain For Balancing Port: 300mA/cell
- NiCd/NiMH Battery Cell Count: 1–15 Cells
- LiPo/LiFe/Lilon Cell Count: 1–6 Cells
- Pb Battery Voltage: 2–20V
- Net Weight: 490g
- Dimensions: 135 x 112 x 60.9mm
|
|
|
