Traxxas 1/16 Rally VXL Driveline & Steering

TRAXXAS

Traxxas Steel Constant Velocity Center Driveshaft Assembly for 1/16 VXL, 7250R

Traxxas Steel Constant Velocity Center Driveshafts are designed to handle the extreme horsepower and torque that Traxxas 1/16 VXL models dish out. Solid-steel construction and heavy-duty drive cups offer maximum precision and efficiency with...

TRAXXAS

Traxxas Ball Bearings (5x8x2.5mm, blue rubber sealed), 5114

This is a 2-pack of Traxxas 5X8mm Ball Bearings. FEATURES: Metal bearing construction and blue rubber dirt shields.

TRAXXAS

Traxxas Half Shafts, Center Front/Center Rear w/metal u-joints, 7056

These are the Front/Rear Center Half Shafts for use on the Traxxas 1/16 E-Revo and Slash Vehicles.

TRAXXAS

Traxxas Axle Carriers 1/16 (left & right), 7034

These are the Left and Right Axle Carriers for use on the Traxxas 1/16 E-Revo and Slash VXL Vehicles.

TRAXXAS

Traxxas Steel Stub Axles Assembled with Yokes, 7054

These are the Assembled Stub Axles and Yokes for use on the Traxxas 1/16 E-Revo and Slash Vehicles.

TRAXXAS

Traxxas Wheel Hubs Hex w/Axle Pins, 7154

These are the Wheel Hubs and Axle Pins for use on the Traxxas 1/16 E-Revo and Slash Vehicles.

TRAXXAS

Traxxas Yokes Differential and Transmission, 7057

These are the Differential and Transmission Yokes for use on the Traxxas 1/16 E-Revo and Slash Vehicles.

TRAXXAS

Traxxas Toe Links (front & rear w/hollow balls, 1/16 Slash), 7038

These are the Front and Rear Toe Links for use on the Traxxas 1/16 Slash Vehicles.

TRAXXAS

Traxxas Push Rod w/Hollow Balls for 1/16 Slash, 7018

These are the Pushrods and Hollow Balls for use on the Traxxas 1/16 Slash VXL 4WD RTR.

TRAXXAS

Traxxas Steel Constant-Velocity Driveshaft Assembly, 1/16 Slash, 7051X

This is the Upgrade Steel Constant-Velocity Driveshaft Assembly for use on the Traxxas 1/16 Slash Vehicles.

TRAXXAS

Traxxas Drive Cups Inner 16th, 7052

This is a pair of Inner Drive Cups for the Traxxas VXL Rally car. For use with steel constant velocity driveshafts.

TRAXXAS

Traxxas Driveshaft Assembly (left or right, 1/16 Slash), 7051

This is the Driveshaft Assembly for use on the Traxxas 1/16 Slash Vehicles.

TRAXXAS

Traxxas Plastic Bellcrank Bushings, 5x8x2.5mm (4), 2545

These are the Stock Replacement Bellcrank Bushings for the Nitro Rustler and other specified Traxxas R/C vehicles. These are located in the steering bellcrank arms. FEATURES: White nylon construction.

TRAXXAS

Traxxas Steering Arm Set 1/16 (upper & lower), 7043

Traxxas Steering Arm Set 1/16 (upper & lower). Includes the following:steering linkservo hornservo saverservo saver springservo horn mountball stud (2)shock mounts, front & rear2.5x18mm CS (4)

TRAXXAS

Traxxas Half Shafts (left or right w/metal U-joints, 1/16 Slash) , 7050

These are the Half Shafts for use on the Traxxas 1/16 Slash Vehicles.

TRAXXAS

Traxxas 1/16 Slash Push Rods (aluminum red-anodized), 7018X

These are the optional Red-Anodized Aluminum Pushrods for use on the Traxxas 1/16 scale Slash Vehicles.

TRAXXAS

Traxxas Hollow Balls 1/16 (20), 7028

Traxxas Hollow Balls 1/16 (20)