 |
 |
 |
|
This is the Savox SC-1268SG High Torque Steel Gear Digital Servo (High Voltage). Savox have now released their 'High Voltage' servo line that can be powered by a unregulated LiPo battery! These servos also feature a redesigned motor/controller unit, and use a 'bullet proof' all steel gear set for unmatched strength.
|
Fitment Key
Plane (P), Sail Plane (SP)
Heli (H), Car (C), Boat (B)
Sail Boat (SB), Truck (T) |
| SC-1268SG |
P,SP,H,C,B,T |
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
FEATURES:
- Combines leading edge technology with super high 12 bit (4096) resolution
- Higher performance due to increased voltage and improved technology
- Incredible torque
- Increased transit speed
- Increased efficiency
- Water resistant with 4 silicon seals implanted
- Strong and precise-made steel gears
- Suitable for 1/8th nitro racing and large scale aircraft, 600 and 700 class helicopters
TECHNICAL SPECS:
- Dimensions(mm): 40.3x20.2x37.2
- Weight(g): 62.0
- Speed(@4.8V sec/60): .15
- Torque(@4.8V oz-in): 160.0
- Speed(@6.0V sec/60): .13
- Torque(@6.0V oz-in): 208.3
- Speed(@7.4V sec/60): .11
- Torque(@7.4V oz-in): 347.2
- Gear: Unique Steel
- Bearing: 2BB
- Case: Aluminum
- Running current (at no load): 100 mA @ 4.8V
- Running current (at no load): 120 mA @ 6.0V
- Running current (at no load): 150 mA @ 7.4V
- Stall current (at locked): 2500 mA @ 4.8V
- Stall current (at locked): 3000 mA @ 6.0V
- Stall current (at locked): 3500 mA @ 7.4V
- Idle current (at stopped): 5 mA @ 4.8V
- Idle current (at stopped): 5 mA @ 6.0V
- Idle current (at stopped): 5 mA @ 7.4V
- Limit angle: 200°±10°
- Connector wire gauge: #22 AWG
- Connector wire length: 200 ±5 mm
- Horn gear spline: 25T
- Control system: Pulse width modification
- Amplifier type: Digital Controller
- Operating Travel: 100° (when 1000→2000 μsec)
- Neutral position: 1500 μsec
- Dead band width: 3 ~ 5 μsec
- Rotating direction: Counterclockwise (when 1000→2000 μsec)
- Pulse width range: 800→2200 μsec
- Maximum travel: Approx 130° (when 900→2100 μsec)
|
|
|
|
|
|
|
|
|
