|
FEATURES: Construction: Elapor foam on the fuselage, wing
and tail section Wings: two-piece, foam construction, blue in color
Radio compartment: Foam Landing gear: No landing gear,model lands on
it's belly Hardware: Push rods and other hardware included Motor
Mount: Molded into the foam fuselage 400 size Permax motor with high
current socket and lead 5" diameter pusher prop with black
spinner (prop faces the rear of the airplane) Colorful Easy Star logo
decals (must be cut out and applied) Ready to fly in two to six
hours
INCLUDES: Foam fuselage, wings, and tail section, 400
size motor (direct drive) with connector and lead (must be soldered
to motor), prop, spinner, hardware package, decals and illustrated
instructions.
REQUIRES: 3-channel radio (throttle, rudder,
and elevator control) with 2 micro servos 12 amp speed control 6 or 7
cell battery from 500 to 1500 mAh with the proper connector (for the
above listed speed control use this connector Charger for the battery
with proper connector Miscellaneous building equipment
SPECS:
Wingspan: 54" (1370mm) Wing Area: 372 sq in (24 sq dm) Weight:
24oz. (680 g) Length: 34" (870mm) Airfoil: Flat bottom, high
wing Center of Gravity: 3.07" (78mm) Back from the wing's
leading edge at the fuselage sides. Control Throws- Elevator: Up &
Down 3/16" (5mm) Rudder: Right & Left 3/8" (10mm)
|
